ABS 700
FRAME CONSTRUCTION
Roll-formed double tube and channel 19gauge steel (all perforations
in channel – no perforations in tube); full front “K” brace support;
approximately 11” clearance between first cross-brace and floor; seat
height from floor approximately 19”; rear legs have (2) steel embossed
cross-braces for extra support/strength; on each chair leg (4) is a
molded foot glide over an extra protective smooth “U” shaped metal
pronged design hairpin for a secure friction fit and are removable
only with the use of tools. (channel bumper optional)
SEAT CONSTRUCTION
Seat frame folds independently of chair frame and rotates from the
open position to the up position during use; 11 gauge steel frame;
vertical leg approx. .875”W and horizontal leg approx. .625”W forms
a rectangular frame measuring approximately 16.5”W x 15.5”L; heavy
duty supported vinyl sewn seat; polyurethane foam seat cushion 2.5”
to 3” thick; cushion conforms to ASTM D3574, California 117 and BIFMA
fire retardant requirements; over ½” thick laminate/wood black ch
alkboard base with enough vent holes to allow for air discharge;
seat frame and seat assembly will be attached directly by using
vandal proof plated recessed hex head screws. (contour foam upholstered
seat optional)
BACKREST CONSTRUCTION
1” thick pure polyurethane foam; heavy duty supported vinyl; .125” shaped
plywood backboard with threaded metal insert/fasteners; upholstered
backrest is approximately 17”W x 11”H; attached with vandal-proof
plated recessed hex head screws.
INTERLOCKING GANGING
Heavy duty die formed 11 gauge steel brackets; designed for fast alignment;
set-up/take down, binding prevention, and minimum chair movement. Chairs
do not release when tipped back. Chairs are approximately 19.5” center to
center.
METAL FRAME FINISH
Powder coat finish of not less than a thickness of 2.5 mm
COLORS
Frame/Upholstery - As per customer selections.
LOGO(S)
As required on chair backrest, top of seat cushion, and/or front edge
WARRANTY
Minimum 25 year limited metal frame warranty.
