THE TS100 IS THE PREFERRED STACKING CART USED BY MOST VENUES FOR THEIR PORTABLE CHAIR HANDLING & STORAGE NEEDS.

TSC 100: SINGLE-TIER CHAIR STORAGECART

1. The Truck frame is 5” x 1.75” / 12 gauge formed channel; one removable handle end-standard “U” formed tube – 1.25” x 14 gauge steel tubing - one sliding adjustable clamp 1.25” x 14 gauge steel tubing; approximately 39” high

2. Four welded caster sockets spaced properly with four non-scuff swivel casters each 5” x 2”. Please note: The TSC120 has two additional casters in the middle for added strength and stability

3. All metal parts are painted black powder coat Truck weight (unloaded):

TSC106 (72”) – 69 lbs.
TSC108 (96”) – 82 lbs.
TSC110 (120”) – 100 lbs.

TS 100: PALLET(STACKING) CHAIR STORAGE CART

1. The Truck frame inside and outside beds are structural steel angles 3” x 3” x .1875” thick; the end frames are 1.5” x 11 gauge high carbon square tubular steel; the support braces are 1.5” x .1875 flat stock; each end support has stacking support couplings of .125” formed steel. Special fork-lift pockets and/or tabs included for safety handling

2. Four welded caster sockets (2” x 2” x .1875” angle) spaced properly with two swivel casters on one end and two rigid casters on the other end - each 6” x 2”. (Each caster load capacity 700 lbs.) Please Note: Starter Block base optional – equipped stacking 3 carts high (approximately 12.5’ height)

3. All metal parts are painted black powder coat.

Dimensions: approx. 127” length, 41” width

Truck weight (unloaded) – 275 lbs.

Approximate chair capacity:

110 – Model CS100 /Convention Series

60 – Model DS100/Diamond Series

50 – Model GS100/Gold Series

80 – Model AS100/Arena Series

CTC-4: DOUBLE-TIER HANGING CHAIR STORAGE CART

1. The Truck frame bed, each upright, and each cross brace is 2” x 1” / 14 gauge formed channel; the chair hanger bars are 1.25” / 14 gauge; and the sway bars are 1.5” x .1875 flat stock

2. Four welded caster sockets spaced properly with four non-scuff swivel casters each 5” x 2”

3. All metal parts are painted black powder coat

Dimensions: approximately 82” length, 32” width, 67.5” height (79.25” loaded)

Truck weight (unloaded) – 120 lbs.

Approximate chair capacity:

80 – Model CS100 /Convention Series

60 – Model DS100/Diamond Series

48 – Model GS100/Gold Series

60 – Model AS100/Arena Series

AT-100: DOUBLE-TIER HANGING CHAIR STORAGE CART

1. The Truck frame bed, each upright, and each cross brace is 2” x 1” / 14 gauge formed channel; the arm hanger bars are 1.25” / 14 gauge; and the sway bars are 1.5” x .1875 flat stock

2. Four welded caster sockets spaced properly with four non-scuff swivel casters each 5” x 2”

3. All metal parts are painted black powder coat

Dimensions: approximately 58” length, 45” width, 65” height

Truck weight (unloaded) – 155 lbs.

Approximate arm capacity: