IDEAL FOR PREFERRED SECTIONS IN ANY VENUE/EVENT CONFIGURATION. PROVIDES HIGH STANDARDS OF COMFORT AND SAFETY. IT FEATURES COMFORTABLE 3” SEAT CUSHIONS, AN INDEPENDENT FLIP-UP SEAT, AND CAN BE MODIFIED TO MEET MOST ANY SEATING APPLICATIONS.

FRAME CONSTRUCTION

Roll-formed double tube and channel 19 gauge steel (all perforations in channel – no perforations in tube); front “K” brace support; approximately 11” clearance between first cross-brace and floor; seat height from floor approximately 19”; rear legs have (2) steel embossed cross-braces for extra support/strength; on each chair leg (4) is a molded foot glide over an extra protective smooth “U” shaped metal pronged design hairpin for a secure friction fit. These are removable only with the use of tools.

SEAT CONSTRUCTION

Seat frame folds independently of chair frame and rotates from the open position to the up position during use; 11 gauge steel frame; vertical leg approximately .875”W and horizontal leg approximately .625”W forms a rectangular frame measuring approximately 16.5”W x 15.5”L; heavy duty supported vinyl sewn seat; polyurethane foam seat cushion 2.5” to 3” thick; cushion conforms to ASTM D3574, California 117 and BIFMA fire retardant requirements; over .5” thick laminate/wood black chalkboard base with enough vent holes to allow for air discharge; seat frame and seat assembly will be attached directly by using vandal proof plated recessed hex head screws.

BACKREST CONSTRUCTION

1” thick pure polyurethane foam; heavy duty supported vinyl; .125” shaped plywood backboard with threaded metal insert/fasteners; upholstered backrest is approximately 16.5”W x 8”H; attached with vandal-proof plated recessed hex head screws.

INTERLOCKING GANGING

Heavy duty die formed 11 gauge steel brackets; designed for fast alignment; set-up/take down, binding prevention, and minimum chair movement. Chairs do not release when tipped back. Chairs are approximately 18.25” center to center.

METAL FRAME FINISH

Powder coat finish of not less than a thickness of 2.5 mm

COLORS

Frame/Upholstery - As per customer selections.

LOGO(S)

As required on chair backrest, top of seat cushion, and/or front edge

WARRANTY

Minimum 25 year limited metal frame warranty.